Boss AR1500M ARMOR 1500-Watt Mono Mosfet Amplifier
Class A/B Topology
A class A/B amplifier uses two groups of transistors and it is generally considered to be the best compromise of the two classes put together. A pure class ‘A’ amplifier typically has an enormous amount of current flowing through its output transistors with no audio signal. A pure class ‘B’ amplifier has no current flowing through its outputs with no audio signal. This eliminates virtually all of the crossover distortion that’s possible with class ‘B’ amplifiers. A class A/B amplifier is much more efficient than a class ‘A’ but without the possible distortion of a class ‘B’.
MOSFET Power Supply
Metal–Oxide–Semiconductor Field-Effect Transistor is a transistor used for amplifying or switching electronic signals in our computers, our telephones, game consoles, cars, electrical appliances, and in this case, our amplifiers. They are found in systems where information is processed or stored. A MOSFET is basically an electrical switch that allows the flow of electrical current. An electrical switch has two possible states, on or off. This is where the MOSFET performs its most important role in our D Class amplifiers by allowing or preventing the flow of power and creating an efficient amplifier.
General Features
- Two Ohm stable operation with output power increase
- Thermal and speaker short protection
- Soft turn-on circuit
- Remote turn on / turn off circuit
- Gunmetal gray anodized heatsink
View larger
Low And High Level Inputs
You can get a signal into Armor series amplifiers two different ways – Low level and High level input. A low level input is measured in voltages. It comes in the form of RCA outputs from the back of your receiver and goes to the RCA inputs on your amplifier. A high level input is measure in wattages. It comes in the form one positive and one negative wire from the back of your receiver to and goes to the input terminal of your amplifier in the same wire form. Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performance. Note: Do not connect both the high level and low level inputs from your receiver to your amplifier at the same time.
View larger
LED Power And Protection Indicators
View larger
Variable Crossover
Subwoofers reproduce sound based low range frequencies. This process is called the crossover effect and occurs because the vast majority of audio systems cannot cover the entire spectrum sufficiently to minimize sound distortion and maintain an appropriate frequency ratio. In the case of our AR1500M amplifier, a variable crossover is offered so that you, the listener, can have the ability to set the frequency at which the crossover occurs, thereby setting precise sound specifications on your subwoofer.
View larger
Nickel Plated RCA Low Level And High Level Inputs
View larger
Bass Boost
Set this dial to your liking and your subwoofers will get that extra kick in the pants that they are looking for, called Bass.
View larger
Fuses, Speaker, And Power Connections
Even the best computers encounter system and file errors. The best thing to do when problems related to an msdt.exe occurs is to know what it is and to identify the root of the problem.
Boss AR1500M ARMOR 1,500-Watt Mono Mosfet Amplifier
No comments:
Post a Comment